Error Code
Thermador Refrigerator E07 Error Code
E07 on a Thermador refrigerator is generally linked to a possible door or door-lock problem. This guide gives a plain-language overview, the symptoms you might notice, safe checks you can perform, and when it is best to call a technician — with a reminder that exact behavior varies by model.
Reviewed by Daniel Reeves · Last reviewed August 18, 2026
Error guide
Code overview
Quick answer — E07 — commonly associated with a door/lock issue on a Thermador refrigerator. Meaning can vary by model; verify before relying on it.
On many Thermador refrigerator models, the E07 code is commonly associated with a possible door or door-lock problem. The exact meaning can differ between appliance series and model years, so treat this as general guidance and confirm it against your specific model’s documentation before acting.
Model note: ASKO reuses codes across series and model years, so E07 may mean something different on another appliance or generation. Confirm against your model’s documentation and record the full model number before acting.
- Error code: E07
- Appliance: Refrigerator
What to look for
Symptoms you may notice
These are the signs homeowners often see when E07 appears on an ASKO appliance.
- The refrigerator shows E07 and the door won’t lock or release
- The cycle won’t start while E07 is displayed
- The door behaves unexpectedly with E07
Why it happens
Possible causes
Exact meaning can vary by model — treat these as common associations, not a final diagnosis.
-
A door-lock mechanism or interlock
-
An obstruction or alignment issue at the door
-
A control signal to the lock
Before you call
Safe checks you can make
Simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
-
Confirm nothing is obstructing the door
-
Check the door closes and latches cleanly
-
Allow the appliance to cool if it was hot, then retry
-
Record the full model number before contacting a technician
Safety first
Important safety warning
Do not open internal panels, access high-voltage wiring, or bypass any safety device. Never open the sealed cooling or refrigerant system — this must be handled by a certified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Get help
When to call a technician
If E07 persists after the safe checks above, or you are unsure at any point, book a diagnosis. A technician can confirm what E07 means on your specific model and resolve the underlying cause safely.
Likely related component:
Often related to the door lock or interlock (varies by model).
References
Sources & references
- Thermador appliance user manual — error/display messages section
FAQ
Frequently asked questions
Quick answers about E07, safe checks, and when to book a technician.
02 answers
You can safely try the basic checks above and a manufacturer-approved restart. If E07 returns, the underlying cause needs a proper diagnosis. Because the meaning can vary by model, confirm against your documentation.
Not necessarily. Thermador reuses codes across series and model years, and the exact meaning can differ. Record your full model number so the code can be interpreted correctly.
Book a repair
Tell us about your ASKO we’ll take it from there
Share your model and that you are seeing E07 — we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Booking request
Request your repair
Fields marked with * are required.