Error Code
ASKO Range E01 Error Code
E01 on an ASKO washer typically points to a door-lock, drain or control communication fault.
Reviewed by Daniel Reeves · Last reviewed August 20, 2026
Error guide
Code overview
Quick answer — E01 on an ASKO washer typically points to a door-lock, drain or control communication fault.
The E01 code generally indicates the washer control detected a sensor or communication problem that can stop drain or spin on Logic and Style models.
Model note: ASKO reuses codes across series and model years, so E01 may mean something different on another appliance or generation. Confirm against your model’s documentation and record the full model number before acting.
- Error code: E01
- Appliance: Range
What to look for
Symptoms you may notice
These are the signs homeowners often see when E01 appears on an ASKO appliance.
- E01 shown on the display
- Oven temperature may drift
- Controls may limit cooking modes
Why it happens
Possible causes
Exact meaning can vary by model — treat these as common associations, not a final diagnosis.
-
A temperature sensor fault
-
A control-board communication issue
-
A wiring or connection problem
Before you call
Safe checks you can make
Simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
-
Confirm the range has stable power
-
Note whether burners still ignite normally
-
Allow the oven to cool fully before checking the door area
Safety first
Important safety warning
Ranges combine gas and high voltage. Internal diagnostics must be handled by a qualified technician.
Please avoid
What not to attempt
Get help
When to call a technician
If E01 persists and oven heat is unreliable, book a diagnosis so the sensor and control can be evaluated safely.
Models
Related models
References
Sources & references
- Appliance user manual — display messages section
FAQ
Frequently asked questions
Quick answers about E01, safe checks, and when to book a technician.
02 answers
Pause use if it will not lock, drain or spin until the fault is diagnosed.
It may clear briefly, but a genuine sensor or control fault will return.
Book a repair
Tell us about your ASKO we’ll take it from there
Share your model and that you are seeing E01 — we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Booking request
Request your repair
Fields marked with * are required.