Error Code
Thermador Dishwasher F03 Error Code
F03 on a Thermador dishwasher is generally linked to a possible water-level or pressure-sensing problem. This guide gives a plain-language overview, the symptoms you might notice, safe checks you can perform, and when it is best to call a technician — with a reminder that exact behavior varies by model.
Reviewed by Daniel Reeves · Last reviewed August 18, 2026
Error guide
Code overview
Quick answer — F03 — commonly associated with a level/pressure issue on a Thermador dishwasher. Meaning can vary by model; verify before relying on it.
On many Thermador dishwasher models, the F03 code is commonly associated with a possible water-level or pressure-sensing problem. The exact meaning can differ between appliance series and model years, so treat this as general guidance and confirm it against your specific model’s documentation before acting.
Model note: ASKO reuses codes across series and model years, so F03 may mean something different on another appliance or generation. Confirm against your model’s documentation and record the full model number before acting.
- Error code: F03
- Appliance: Dishwasher
What to look for
Symptoms you may notice
These are the signs homeowners often see when F03 appears on an ASKO appliance.
- The dishwasher shows F03 and over- or under-fills
- The cycle stalls with F03 displayed
- Water levels seem wrong when F03 appears
Why it happens
Possible causes
Exact meaning can vary by model — treat these as common associations, not a final diagnosis.
-
A pressure switch or level sensor
-
A blocked pressure hose or chamber
-
A control interpreting levels as a fault
Before you call
Safe checks you can make
Simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
-
Check the accessible filter for blockages
-
Confirm drainage access is clear
-
Perform a manufacturer-approved restart
-
Record the full model number before contacting a technician
Safety first
Important safety warning
Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Get help
When to call a technician
If F03 persists after the safe checks above, or you are unsure at any point, book a diagnosis. A technician can confirm what F03 means on your specific model and resolve the underlying cause safely.
Likely related component:
Often related to the pressure switch / level sensor (varies by model).
References
Sources & references
- Thermador appliance user manual — error/display messages section
FAQ
Frequently asked questions
Quick answers about F03, safe checks, and when to book a technician.
02 answers
You can safely try the basic checks above and a manufacturer-approved restart. If F03 returns, the underlying cause needs a proper diagnosis. Because the meaning can vary by model, confirm against your documentation.
Not necessarily. Thermador reuses codes across series and model years, and the exact meaning can differ. Record your full model number so the code can be interpreted correctly.
Book a repair
Tell us about your ASKO we’ll take it from there
Share your model and that you are seeing F03 — we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Booking request
Request your repair
Fields marked with * are required.