Error Code
ASKO Drying Cabinet E01 Error Code
E01 on an ASKO drying cabinet is generally linked to a possible heating-related problem. This guide gives a plain-language overview, the symptoms you might notice, safe checks you can perform, and when it is best to call a technician — with a reminder that exact behavior varies by model.
Reviewed by Daniel Reeves · Last reviewed August 18, 2026
Error guide
Code overview
Quick answer — E01 — commonly associated with a heating issue on an ASKO drying cabinet. Meaning can vary by model; verify before relying on it.
On many ASKO drying cabinet models, the E01 code is commonly associated with a possible heating-related problem. The exact meaning can differ between appliance series and model years, so treat this as general guidance and confirm it against your specific model’s documentation before acting.
Model note: ASKO reuses codes across series and model years, so E01 may mean something different on another appliance or generation. Confirm against your model’s documentation and record the full model number before acting.
- Error code: E01
- Appliance: Drying Cabinet
What to look for
Symptoms you may notice
These are the signs homeowners often see when E01 appears on an ASKO appliance.
- The drying cabinet shows E01 and results are cold or under-heated
- The cycle runs longer than usual before E01 appears
- Heating seems weak or absent when E01 is shown
Why it happens
Possible causes
Exact meaning can vary by model — treat these as common associations, not a final diagnosis.
-
A heating element or its relay
-
A control or sensor affecting heating
-
Limescale or wear reducing heat on some models
Before you call
Safe checks you can make
Simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
-
Confirm the appliance has power at the outlet
-
Allow the appliance to cool fully before any check
-
Perform a manufacturer-approved restart
-
Record the full model number before contacting a technician
Safety first
Important safety warning
Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Get help
When to call a technician
If E01 persists after the safe checks above, or you are unsure at any point, book a diagnosis. A technician can confirm what E01 means on your specific model and resolve the underlying cause safely.
Likely related component:
Often related to the heating element or relay (varies by model).
References
Sources & references
- ASKO appliance user manual — error/display messages section
FAQ
Frequently asked questions
Quick answers about E01, safe checks, and when to book a technician.
02 answers
You can safely try the basic checks above and a manufacturer-approved restart. If E01 returns, the underlying cause needs a proper diagnosis. Because the meaning can vary by model, confirm against your documentation.
Not necessarily. ASKO reuses codes across series and model years, and the exact meaning can differ. Record your full model number so the code can be interpreted correctly.
Book a repair
Tell us about your ASKO we’ll take it from there
Share your model and that you are seeing E01 — we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Booking request
Request your repair
Fields marked with * are required.